So you want to connect your new Hidden Router to your existing router, but for some reason - you want to assign a static IP on the Hidden Router.
To do that - follow this guide. To make everything easier - we are assuming that your existing routers IP address is 192.168.1.1 and you want to Hidden Router WAN to use address 192.168.1.2.
Connect to the hidden router and once you are connected - go to http://admin.hiddenrouter.com/cgi-bin/luci/admin/network/network/wan
Then on Protocol - click on DHCP client and select the one above it - Static address.
Then on IPv4 address add 192.168.1.2
On ip netmask - select 255.255.255.0
On ipv4 gateway - put in 192.168.1.1
On WAN under "use custom DNS" - you need to add 18.104.22.168, then click on the plus icon right next to it, add 22.214.171.124
Then go to the bottom right corner of the page, click SAVE AND APPLY, and after its done - go ahead and restart the Hidden Router to apply the changes.
After it boots back up - you should have your Hidden Router connected to your existing router with IP address 192.168.1.2
Don't have a router yet? Grab yours from our store - https://store.hiddenrouter.com/products/hidden-vpn-wifi-router-m250